Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill

Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill
by Hitachi

Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill
List Price: $128.58
Our Price: $46.95
You Save: $81.63 (63%)
Availability: Usually ships in 1-2 business days
Category: Tools
See more product details


(Click here)

Product Details

Manufacturer: Hitachi
Model: FDV16VB2
Product features:
  • 5/8-inch hammer drill that offers impact drill or drill-only modes at the push of a button
  • Low noise cooling air-flow design so it won't overheat
  • Contains ball and needle bearings for ultimate durability; double insulated for safety and endurance
  • Industrial grade keyed chuck; trigger-controlled variable speed from 0-2900 rpm
  • Tool weighs just 3.5 pounds; 11-5/16 inches long
Accessories:

Description of Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill

Includes 5/8-in VSR 2-Mode 5 Amp Hammer Drill - FDV16VB2, Side Handle - 303659, Depth Stopped - 303709, Chuck Key - 303334, Case - 315999
This 1/2-inch chuck hammer drill is designed for drilling holes in brick, cement block, concrete, wood, metal, and resin plate. With additional accessories it can also be used to grind, sand, and polish wood and metal, or to tighten or remove screws. It's powered by a 5 amp motor and has trigger-controlled variable speed from 0 to 2,900 rpm, as well as a variable speed dial to set a speed range. The trigger can be locked on to reduce finger fatigue, and the tool can be operated in hammer drill or drill only modes depending on your application. This hammer drill can drill up to 5/8-inch holes in masonry, 1/2-inch holes in steel, or up to 1-inch holes in wood. The FDV16VB2 is constructed with ball and needle bearings for durability, has a keyed chuck for easy bit changes, and comes with a carrying case.

Tools and Hardware Reviews of Hitachi FDV16VB2 5 Amp 5/8-Inch Hammer Drill

Customer Review: A great variable speed hammer drill
Summary: 5 Stars

I have had the drill for a couple of years. I think it is really great and have never had any of the negative experiences listed in these other reviews. I find the slow setting quite slow. I find the high setting quite fast. My nephew and I installed about 30 rock climbing holds using tapcon screws and this drill. It worked absolutely great, and we were trying to do it with two other, much less expensive drills before that. Since then, I have drilled into masonry several times without issue. I have had it break a few screws when I have tried to put them into particularly hard stone, but the drill has always been fine. I haven't had it break a tapcon - those screws are worth the extra you pay, they are great! As of right now, I have owned about five different drills in my life and this is the best one for building, cutting holes, and driving screws or drilling holes into masonry. I haven't used a lot of high-end drills, so I cannot compare this to a Bosch or the like, but I am not disappointed at all with the product. Maybe some of these people got defective ones. If that were the case, I would suggest they do an exchange, because the one that I have works very well. One point, this drill uses a chuck key to tighten the bits, it is corded. I don't use it as my primary drill, I have a cordless drill that I use for everyday tasks, including as an electric screw-driver. I break out this drill when I am building something, cutting something thick or tough, or doing anything with masonry.

Hammer Drills

Tools and Hardware
Bestsellers in Hammer Drills
Similar Tools and Hardware Products
Bench Dog 10-035 Bench Cookie Work Grippers, 4-Pack ImageBench Dog 10-035 Bench Cookie Work Grippers, 4-Pack
Bench Dog; Tools
Best price: $9.91
Price in other shops: $18.94
Hitachi C10FCE2 10-Inch Compound Miter Saw ImageHitachi C10FCE2 10-Inch Compound Miter Saw
Hitachi; Tools
Best price: $114.00
Price in other shops: $263.34
TEKTON 2928 14-Piece Power Nut Driver Bit Set ImageTEKTON 2928 14-Piece Power Nut Driver Bit Set
TEKTON; Tools
Best price: $4.99
Price in other shops: $15.99
Skil 5480-01 13 Amp 7-1/4-Inch Circular Saw Kit ImageSkil 5480-01 13 Amp 7-1/ 4-Inch Circular Saw Kit
Skil; Tools
Best price: $49.98
Price in other shops: $97.64
Mirka 23-615-AP Gold 5-Inch 8-Hole Dustless Hook-and-Loop Sanding Disks, 10 Each of 5 Grits ImageMirka 23-615-AP Gold 5-Inch 8-Hole Dustless Hook-and-Loop Sanding Disks, 10 Each of 5 Grits
Mirka; Tools
Best price: $11.50
Price in other shops: $19.88
Dremel 4486 MultiPro Keyless Chuck ImageDremel 4486 MultiPro Keyless Chuck
Dremel; Tools
Best price: $2.49
Price in other shops: $12.13
Kreg DDS 3-Inch No.2 Square Driver Bit and 6-Inch No.2 Square Driver Bit for Kreg Pocket Hole Systems ImageKreg DDS 3-Inch No.2 Square Driver Bit and 6-Inch No.2 Square Driver Bit for Kreg Pocket Hole Systems
Kreg; Tools
Best price: $3.64
Price in other shops: $5.25
Hitachi NT50AE2 18-Gauge 5/8-Inch to 2-Inch Brad Nailer ImageHitachi NT50AE2 18-Gauge 5/ 8-Inch to 2-Inch Brad Nailer
Hitachi; Tools
Best price: $50.00
Price in other shops: $148.05
Bosch HCBG500 Blue Granite Hammer Drill Bit Carbide Tip Starter Set, 5-Piece ImageBosch HCBG500 Blue Granite Hammer Drill Bit Carbide Tip Starter Set, 5-Piece
Bosch; Tools
Best price: $9.99
Price in other shops: $22.73
DEWALT DW5207  7-Piece Premium Percussion Masonry Drill Bit Set ImageDEWALT DW5207 7-Piece Premium Percussion Masonry Drill Bit Set
DEWALT; Tools
Best price: $18.68
Price in other shops: $31.88
Illustrated catalog for tools and hardware.
Our prices are low